Introduction to hydraulic roller sanding machine
The hydraulic roller sanding machine is also known as the hydraulic roller crusher. In fact, it upgrades the commonly used spring roller crusher and uses the hydraulic cylinder as the pressure output. The main transformation of the hydraulic roller sand machine is to change the old-fashioned spring into a hydraulic device. The old-fashioned spring-to-roll sand machine needs to manually adjust the spring pressure after being used for a period of time to meet the requirements for the finished product, while the full hydraulic roller sand machine is automatically adjusted, automatically recharged, and the pressure is more accurate. Except for the different pressure structure, the structure and working principle of the hydraulic roller sand machine are the same everywhere.
Why did you choose Hua Shengming?
1. The hydraulic roller sand machine is better than the hammer sand machine, and there is no need to replace the fragile parts.
2. The sand grains are full, the grading is reasonable, the crushing rate is low, and the yield is high.
3. Hydraulic has advantages over the hammer crusher and impact crusher. The average service life of the roller sleeve is more than 2 years.
4. Huashengming high-chromium manganese steel wear-resistant material containing rare metal roller leather has been applied to China, the particle size of the discharge can be adjusted. It has been applied to China, and the hydraulic roller of the roller of the sanding machine has been applied to China.
Applicable materials.
Crushing and sanding of river pebbles, calcite, quartz, glass, marble, pebbles, bentonite, iron ore, lapis lazuli, mountain stone, limestone, weathered sand, pyroxene, granite, basalt and other materials.
Operating principle
The hydraulic roller sanding machine is crushed through the roller. The material enters between the rollers from the feeding port and breaks the pebbles through extrusion. There is a gap between the two roller wheels, the gap between the two roller wheels becomes larger, and the particle size of the material discharge becomes larger. Under the action of the compression spring, the gap between the two roller wheels becomes smaller and the particle size of the discharge becomes smaller. By changing the adjustment gap, the particle size of the material can be controlled.
Model differentiation
The hydraulic roller sanding machine can be divided into large and medium-sized according to different models.
1, 800×600, 800x800, 1000×800, with a current output of 20-50 tons, belongs to the medium-sized hydraulic roller sand machine.
3, 1200×800, 1200×1000, 1500×800, 1500×1000, 1500×1200, 1800×1200, 2000×1000 and above, with a current output of 50-400 tons, which belongs to a large hydraulic roller sand machine.
According to the actual situation of each customer, Gongyi Huashengming Heavy Industry Machinery Factory is divided into three types: high configuration, general configuration and low configuration. Customers can ask the sales manager to recommend the product type and performance suitable for them according to their actual situation.
Performance advantages
1. Compact structure, high yield and energy saving
2. Low crushing power and good crushing effect
3. New upgrade · fully automatic hydraulic system
4. Thickened roller skin and long service life
5. Hydraulic spring integration, balanced flashback protection, no fragile parts
Technical parameter
Notice：
Home > Product Center > System sand machine > text > text
direct deal
Quality assurance
Worry-free distribution
After-sale guarantee
