Current Position : Home > Products > Stone crushing >
Coal gangue crusher
Stone crushing

Coal gangue crusher

new type coal gangue crusher

 

stock and delivery of coal gangue crusher

 

Coal gangue crusher

Huashengming Heavy Industry Factory has developed this new advanced double-stage crusher, which is much suitable to be used in crushing the gangue, shale, coal cinder, etc. It is based on our long period of investigation, designing and trying.

Applications

Double stage crusher can be widely used in crushing coal gangue, shale, clay, slag, limestone, construction wastes, tailing ore and other materials. It is easy to crush high moisture materials with very fine output.

Working principle

Double stage crusher has the same working principle with the hammer crusher, it depends on the hammer to smash the materials, as the double stage crusher is the combination of 2 hammer crusher, so it is has two-rotor hammer to smash.

Features

The double stage crusher is equivalent to the combination of two sets of hammer crushers, with two rotors in series connection. It has the following features:

1. Double crushing with two rotors fluctuating at two levels up and down. The related two rotors lead the first crushed materials by the upper rotor into the lower rotor for the second crushing, inside materials crash to each other, so to get the result that hammer crushing powder, powder crushing powder, and then finished materials are discharged directly.

2. This machine has not bottom screen,which means each kind of wet slag can be crushed, even it comes out from water, it does not exist the phenomenon of binding and clogging.

3. The double stage crusher grinds at the same time and the reduction ratio is big, making the material granularity not surpass 3mm. It can meet the request of producing standard brick and the hollow brick.

4. The output is high with low power consumption. Each hour may crush 20 tons at least and the cost of crushing one ton cinder (electrical bill, attrition, wages) is lower.

5. Unique bidirectional adjustable gap technology. After the hammer wore and tore, the gap between it and the liner-plate became large and so does the material size. At the moment, adjustment of hammer from the middle to the liner-plate can make the distance between them shorter, so the machine can continue to be used, which can reduce the investment and save the cost.

6. Centralizing lubrication system that is fast and convenient for filling oil without stopping machine.

7. Hydraulic automatic startup chassis. The machine is equipped with the hydraulic open and fold shell. It needs just one person to operate and of easy maintenance, security and reliability.

Technical parameters  

 

Model

Max. feeding size
(mm)

 Discharging size

Capacity (t/h)

Moisture content
allowed

Motor power(kw)

Dimension(mm)

SCF600x400

≤100

≤3mm (smaller than 2mm is over 85%)

15-25

Below 20%

18.5+18.5(15)kw-4level

2450x1020x1700

SCF600x600

≤110

20-30

22+22(18.5)kw-4level

2450x1280x1650

SCF800x600

≤120

35-55

  45+45(37)kw-4level

3760x1314x2100

SCF800x700

≤120

45-60

45+55kw-4level

3485x1400x2254

SCF800x800

≤120

50-60

45+55(45)kw-4level

3760x1840x2100

SCF900x800

≤120

50-70

55+75kw-4level

3950x1750x2280

SCF1000x800

≤180

60-90

75+55kw-4level

4100x1840x2450

SCF1100x1000

≤180

80-100

90+110kw-4level

4086x2030x2337

SCF1400x1200

≤200

100-120

132+160kw-4level

5800x2658x3210

Notice: Any change of technical specification shall not be advised additionally.