Current Position : Home > Products > Stone crushing >
Sizing Teeth Roll Crusher
Stone crushing

Sizing Teeth Roll Crusher

Sizing Teeth Roll Crusher

Sizing Teeth Roll Crusher
 

Sizing Teeth Roll Crusher Application:
Crushing Material from 50-1500mm to 15-300mm, capacity can reach 80-3000t/h. Crushing Strength: <200mpa.
Coal: Raw coal with rock and clean coal sizing.
Construction Materials: Limestone, Gypsum, Marl, Clay
Industrial Materials: Borax, Chalk, Kimberlite, Oil Sands
Mixed/Medium Strength Ores: Gold, Nickel, Silver, Copper
Miscellaneous: Overburden, Coke, Carbon Anodes.
 

Sizing Teeth Roll Crusher Characteristic:
1. Correctly Control product particles
2. has no over crushing problem.
3. Very low wear of teeth roller and energy consuming.
4. double efficacy: screening and crushing
5. Simple structure, low height of complete machine, small operation vibration.
6. adjustable width between centers
7. crushing tooth is high intensity and high wearing.
(for commen coal it can be weld buildup or changes at job site and the working life will not lower than 6000 hours).
8. large processing capacity, less noise level and small quantity of dust.
9. has self cleaning set-up, avoid non-choking of sticky material.
10. intelligent lubrication system.
 

Sizing Teeth Roll Crusher Main Structures:
1.Driven parts: Motor, Reducer, hydraulic couplers
2.Protect parts: Shaft and hydraulic couplers protects
3.Body: this part we will use carbon steel as material
4.Broken teeth: use Manganese alloy casting
5.Cover and hopper: according to your requirements, we can supply cover and hopper for you.
Sizing Teeth Roll Crusher
 

Sizing Teeth Roll Crusher Working principle:
The structure of our Double Teeth Roll Coal Crusher,especially broken teeth make the material powder percent very low.
1. material be feed to our crusher machine and begin first screening----screen the material which size no need be broken .
2. the material can’t past the teeth roller ,will be broken to small size.
3.material finish break and get the finished products you need.
According to the optimum design of crushing tooth shape and tooth layout, the two rollers relative rotation as a grizzly.
so as to make the material which size is bigger than request will be crushed and material which meet the size need will be directly pass through.
discharging sizes to be block shape, less fine power, low energy consume.
 

Sizing Teeth Roll Crusher technical Specification:

140 Series Sizing Tooth- Roll Crusher For Coarse Crushing

Model Specification

2PLF-140/150 2PLF-140/200 2PLF-140/250

2PLF-140/300

Inlet Size(mm)

≤1500 ≤1500 ≤1500

≤1500

Discharge Size(mm)

≤300 ≤300 ≤300

≤300

Capacity(t/h)

1300-2500 1700-3800 2200-4600

2700-5500

Single Driven Type Motor Power(kw)

315-355 355-450 400-560

450-630

Dual Driven Type Motor Power(kw)

2×(185-280) 2×(200-315) 2×(220-355)

2×(250-400)

120 Series Sizing Tooth- Roll Crusher For Coarse Crushing

Model Specification

2PLF-120/150

2PLF-120/200

2PLF-120/250

2PLF-120/300

Inlet Size(mm)

≤1200

≤1200

≤1200

≤1200

Discharge Size(mm)

≤300

≤300

≤300

≤300

Capacity(t/h)

≤1500

≤2000

≤2700

≤3300

Single Driven Type Motor Power(kw)

315-355

355-450

450-560

560-630

Dual Driven Type Motor Power(kw)

2×(132-185)

2×(160-220)

2×(185-250)

2×(200-315)

100 Series Sizing Tooth- Roll Crusher For Coarse Crushing

Model Specification

2PLF-100/160

2PLF-100/200

2PLF-100/250

Inlet Size(mm)

≤700

≤700

≤700

Discharge Size(mm)

50-150

50-150

50-150

Capacity(t/h)

280-850

350-1000

500-1500

Single Driven Type Motor Power(kw)

160-200

160-250

200-315

Dual Driven Type Motor Power(kw)

2×(90-132)

2×(110-160)

2×(132-200)

80 Series Sizing Tooth- Roll Crusher For Medium Crushing

Model Specification

2PLF-80/150

2PLF-80/200

2PLF-80/250

2PLF-80/300

Inlet Size(mm)

≤550

≤550

≤550

≤550

Discharge Size(mm)

50-150

50-150

50-150

50-150

Capacity(t/h)

200-600

260-750

300-1000

400-1150

Single Driven Type Motor Power(kw)

132-160

160-200

185-250

250-280

Dual Driven Type Motor Power(kw)

2×(75-90)

2×(90-132)

2×(110-185)

2×(132-220)

50 Series Sizing Tooth- Roll Crusher For Fine Crushing

Model Specification

2PLF-50/60

2PLF-50/120

2PLF-50/150

2PLF-50/200

Inlet Size(mm)

≤300

≤300

≤300

≤300

Discharge Size(mm)

50-150

50-150

350-150

50-150

Capacity(t/h)

80-240

200-600

250-700

300-800

Single Driven Type Motor Power(kw)

37

75

90

160

Dual Driven Type Motor Power(kw)

2×18.5

2×37

2×45

2×75